Non-standard series bearings manufacturer

Non-standard series bearings

Non-standard series bearings, Generally speaking, the sizes of the bearings that are different from the national standard.
Non-standard series bearings characteristics are low universality, mostly for special equipment, special occasions, small batch, and the majority of new research and development equipments are trial products, but because of its large scale and mass production, there are not many production enterprises, but the cost is high and the price is more expensive.

Non-standard series Bearings

Any combination of closures is available

Basic
Bearing
No.
Nominal Bearing Dimensions Preferred Shoulder Diameters
d D B,C r (min) da (min) da (max) Da (max)
Open shielded sealed
mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch
1602 6.350 0.2500 17.463 0.6875 6.35 0.1200 0.30 0.120 8.2 0.323 9.1 0.358 15.6 0.614
99502H 15.875 0.6250 34.925 1.3750 11 0.4331 0.60 0.024 20.0 0.787 0.2 1.189
6201-1/2 12.7 0.5000 32 1.2598 10 0.3937 0.60 0.024 15.1 0.595 17.0 0.670 27.0 1.063
6202-5/8 15.875 0.6250 35 1.3780 11 0.4331 0.60 0.024 18.5 0.730 19.0 0.749 30.0 1.181
6202-16 16 0.6299 35 1.3780 11 0.4331 0.60 0.024 18.8 0.740 19.0 0.749 30.0 1.181
6203-5/8 15.875 0.6250 40 1.5748 12 0.4724 0.60 0.024 19.1 0.750 23.5 0.926 35.1 1.380
98205 25 0.9843 52 2.0470 9 0.3543 1.00 0.039 28.2 1.110 8.8 1.921
SC205 25 0.9843 52 2.0470 14 0.5512 1.00 0.039 30.6 1.205 6.4 1.827
SC0563 25 0.9843 62 2.4409 12 0.4704 1.10 0.043 32.0 1.260 5.0 2.165
62/22 22 0.8661 50 1.9685 14 0.5512 1.00 0.039 27.0 1.063 29.5 1.161 45.0 1.772
63/22 22 0.8661 56 2.2047 16 0.6299 1.10 0.043 28.5 1.122 30.5 1.201 49.5 1.949
63/22A 22 0.8661 56 2.2047 15 0.5906 1.10 0.043 28.5 1.122 30.5 1.201 49.5 1.949
63/28 28 1.1024 68 2.6772 18 0.7087 1.10 0.043 35.0 1.378 38.5 1.516 1.0 2.402
63/28A 28 1.1024 68 2.6772 17 0.6693 1.10 0.043 35.0 1.378 38.5 1.516 1.0 2.402
28BCS15 28 1.1024 72 2.8346 18 0.7087 1.10 0.043 35.0 1.378 64.4 2.535
B15-70 15 0.5906 32 1.2598 11 0.4330 0.3 0.012 17.0 0.669 19.0 0.748 30.0 1.181
B14-42 14 0.5510 42 1.6535 13 0.5118 1.0 0.039 19.8 0.781 23.0 0.906 37.0 1.457
402082 30 1.1811 72 2.8346 19 0.7480 1.1 0.043 36.5 1.437 43.0 1.693 65.5 2.579
MS12 31.750 1.2500 79.247 3.1239 22.225 0.8740 1.10 0.043 44.0 1.732 78.0 3.071

 

Basic
Bearing
No.
Nominal Bearing Dimensions Preferred Shoulder Diameters
d D B C r (min) da (min) da (max) Da (max)
mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch
88507 35 1.3779 72 2.8346 25 0.9843 17 0.6693 1.10 0.043 41.0 1.614 45.0 1.772 65.5 2.579
88508 40 1.5748 80 3.1496 27 1.0630 21 0.8268 1.50 0.059 46.0 1.811 51.0 2.008 73.5 2.894
88509 45 1.7717 85 3.3464 27 1.0630 21 0.8268 2.00 0.079 51.0 2.008 55.5 2.185 78.5 3.091
88509A 45 1.7717 85 3.3464 23 0.9055 19 0.7480 2.00 0.079 51.0 2.008 55.5 2.185 78.5 3.091
T88509 45 1.7717 85 3.3464 23 0.9055 19 0.7480 1.10 0.043 51.0 2.008 55.5 2.185 78.5 3.091
88510 50 1.9685 90 3.5433 30 1.1811 22 0.6215 1.10 0.043 56.5 2.205 60.0 2.362 83.5 3.287
88511 55 2.1654 100 3.9370 31 1.2205 23 0.9055 2.00 0.079 62.0 2.441 67.0 2.638 92.0 3.622
88512 60 2.3622 110 4.3307 36 1.417 22 0.8660 1.50 0.059 68.0 2.677 75.0 2.953 102.0 4.016

☆We reserve the right to change specifications and other information included in this catalogue without notice.

Other Parameters

Basic
Bearing
No.
Basic Load
Ratings (lbs)
Factor Limiting Speeds
(1000 RPM)
Ball
Complement
Bearing Weight
(Approx.)
Cr 
KN
Cor
KN
fo Grease
rpm
Oil
rpm
No. Size
mm
Weight
Ibs kg
1602 1.511 0.724 12.9 35000 41500 9 2.831 0.0154 0.007
99502H 7.750 3.600 13.0 24000 34000 8 5.953 0.0946 0.043
6201-1/2 6.800 3.050 12.3 23000 28000 7 5.953 0.0792 0.036
6202-5/8 7.750 3.600 13.2 20000 25000 8 5.953 0.1012 0.046
6202-16 7.750 3.600 13.2 20000 25000 8 5.953 0.1012 0.046
6203-5/8 9.600 4.600 13.2 18000 22000 8 6.747 0.1430 0.065
98205 10.690 6.570 15.0 18000 28000 11 6.350 0.1804 0.082
SC205 14.020 7.880 14.0 18000 28000 9 7.938 0.2640 0.120
SC0563 16.650 9.590 12.0 16000 24000 9 8.731 0.3916 0.178
62/22 11.620 6.490 13.5 14000 17000 9 7.144 0.2580 0.117
63/22 18.510 9.360 12.4 13000 15000 7 10.318 0.3946 0.179
63/22A 18.510 9.360 12.4 13000 15000 7 10.318 0.3946 0.179
63/28 24.960 13.830 13.0 11000 13000 8 11.509 0.6512 0.296
63/28A 24.960 13.830 13.0 14000 22000 8 11.509 0.6512 0.296
28BCS15 26.820 14.070 13.0 13000 21000 7 12.700 0.7546 0.343
B15-70 5.850 2.850 13.9 25000 29000 9 4.763 0.0660 0.030
B14-42 11.900 5.450 12.3 19000 22000 7 7.938 0.1804 0.082
402082 28.100 16.000 13.3 7900 6000 8 12.000 0.7678 0.349
MS12 25.500 17.580 13.0 12000 17000 7 14.288

 

Basic
Bearing
No.
Basic Load
Ratings (lbs)
Factor Limiting Speeds
(1000 RPM)
Ball
Complement
Bearing Weight
(Approx.)
Cr 
KN
Cor
KN
fo Grease
rpm
Oil
rpm
No. Size
mm
Weight
Ibs kg
88507 27.060 15.330 13.8 10000 12000 8 12.000
88508 29.520 18.140 14.0 8800 10000 9 12.000 0.9900 0.450
88509 29.360 19.190 14.4 7200 9000 10 11.509 1.1000 0.500
88509A 29.360 19.190 14.4 7200 9000 10 11.509 1.1000 0.500
T88509 29.360 19.190 14.4 7200 9000 10 11.509
88510 35.070 23.220 14.4 7100 8300 10 12.700 1.0252 0.466
88511 39.070 26.540 14.3 6100 7500 10 13.494 1.6720 0.760
88512 47.780 32.750 14.3 6000 7300 10 15.081 1.7446 0.793